New Farmikko 300TCE Tree shear log grapple
Hiltulanlahti
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+358 44 50...
Show
+358 44 5000084
Finland 
Finland, Jyväskylä
Finland, Kittilä
Greece, Thessaloniki
177 kg
Poland, Rzędziany
700 kg
Net weight
300 kg
Poland, Rzędziany
245 kg
Ukraine, s. Dubovychi
Slovenia, Šentjernej
Spain, Lliça de Vall (Barcelona)<br>
255 kg
Poland, Nądnia
195 kg
Poland, Rzędziany
255 kg
Poland, Nądnia
750 kg
Austria, Deutsch Goritz
Spain, Lliça de Vall (Barcelona)<br>
320 kg
Austria, Deutsch Goritz
Portugal, Casal Da Fisga, Rio Maior
600 kg
Slovenia, Šentjernej
225 kg
Poland, Nądnia
400 kg
Poland, Rzędziany
Spain, Lliça de Vall (Barcelona)<br>
255 kg
Poland, Nądnia
The 300TCE is intended for use in forest machines and bigger tractor cranes. It is also well suited for trucks equipped with a crane.
For professional energy wood harvesting, the 300TCE strengths are its very good multi tree handling capacity combined with fast guillotine cutting and excellent loading properties.
Several trees can be collected without making so-called intermediate fellings, which significantly increases the efficiency of work on small-tree sites by more than half. The automatic collector works with two collection jaws, which tightly squeeze the collected trees in their grip, making the collection precise. Collector jaws move automatically thanks to the internal hydraulic control of the tree shear. User does not need to make separate control movements to perform the collection functions.
The strong and fast guillotine, which operates with two knife blades, always cuts even the smallest twig cleanly and does not pull out the roots. The guillotine’s cutting capacity is a maximum of 30 cm in diameter, which is already quite sufficient for energy wood.
Energy wood can be loaded into piles or into a load with the same tree shear thanks to its good loading capacity. The grapple has an opening of 125 cm and its geometry is excellent for loading. The guillotine’s blades are always automatically protected in their housing during loading, so loading is just as successful as with a normal wood grapple.
300TCE is equipped with a wireless electrical controlled tilt function, which brings several benefits. When felling trees, tilting is precise. Tree shear only falls when the micro switch is pressed in the cabin. The increase in the system’s hydraulic pressure does not affect the tilt operation, for example when the tree is being cut with a guillotine. This ensures that the grapple never accidentally tilts while the tree is still being cut.
When loading trees, a significant advantage of the electric tilt is that the grapple can also be turned from a horizontal position to a vertical position with the tree shear. Moving wood materials vertically requires less working space and the work is significantly faster.
In addition to the above functions, the 300TCE is equipped with a delimber, which allows the tree’s to be delimbed using the crane’s lifting movement.
The 300TCE is quick to get installed. The tree shear is attached to the forest crane rotator and 2pcs hydraulic hoses are connected, just like installing a normal wood grapple. The tree shear has a wireless receiver for the tilt function pre-installed at the factory. Only a wireless transmitter/micro switch is brought into the machine’s cabin and the micros witch controls the tilt function. There is no need to install any electrical cables along the crane boom.